Paint-Grade Compressed Air Quality and Dryer Inspection

Inspection template for verifying clean, dry paint-grade compressed air and desiccant dryer performance in a body shop or paint booth environment.

Inspection Details

• Inspection date and time recorded
• Inspector name and role documented
• Booth or air system identification documented
• Inspection type selected
• Reference SOP or maintenance log reviewed

Air Quality at Point of Use

• Air stream is free of visible water, oil mist, or particulate at point of use
• Inline filter housings are intact and properly installed
• Filter differential pressure is within acceptable range
• Air line pressure at booth regulator is within paint system specification
• Condensate traps and drains are not leaking into the air stream

Desiccant Dryer Performance

• Dryer status indicates normal operation
• Dew point indicator is within acceptable range for paint-grade air
• Desiccant tower cycle or regeneration appears normal
• Dryer alarms, fault lights, or bypass indicators are absent
• Pre-filter and after-filter service indicators are within maintenance interval

Drainage, Contamination Control, and Housekeeping

• Automatic drains discharge properly and do not remain stuck open or closed
• Compressor room and dryer area are clean and free of dust accumulation near air intakes
• No evidence of oil carryover, rust, scale, or water pooling in lines or receivers

Documentation, Corrective Action, and Sign-Off

• Any deficiencies or non-conformances documented with location and symptom
• Corrective action assigned for each failed critical item
• Booth air supply approved for paint use
• Inspector signature captured