IDDSI Liquid Flow Test Log

Inspection log for recording the IDDSI 10 mL syringe flow test result, classifying a drink from Level 0 Thin through Level 3 Moderately Thick, and documenting serving-temperature consistency verification.

Inspection Details

• Inspection date and time recorded
• Inspector name or role documented
• Location or service area identified
• Intended beverage or recipe name documented
• Target IDDSI level selected

Test Setup and Conditions

• 10 mL syringe used for the flow test
• Syringe positioned vertically and test started with thumb over nozzle
• Liquid tested at serving temperature
  Confirm the sample was tested at the temperature it will be served, since viscosity may change with temperature.
• Sample mixed uniformly before testing
• Test performed on a representative sample

Flow Test Result

• Volume remaining in syringe after 10 seconds
• Measured IDDSI level based on flow result
• Result matches intended target level
• Flow test completed within the expected 10-second interval

Classification and Corrective Action

• Final beverage classification documented
• Corrective action documented when result is out of range
• Product held or removed from service if out of specification
• Retest performed after adjustment when required

Review and Sign-Off

• Supervisor or dietitian review completed when needed
• Supporting notes or observations recorded
• Photo evidence attached for unusual or failed result
• Inspector signature