Cruise Ship Fire Detection System Daily Test Log

Daily inspection log for cruise ship fire and smoke detection systems to verify control panel status, zone function, alarm activation, detector readiness, notification devices, and corrective actions.

Inspection Details

• Inspection date and time recorded
• Vessel name and fire detection system area identified
• Inspector name and role recorded
• Test performed in accordance with shipboard fire safety procedure and applicable testing requirements

Control Panel and Power Status

• Fire alarm control panel shows normal condition with no active trouble or supervisory signals
• Primary power supply present and indicated normal
• Secondary power or battery supply present and indicated normal
• Control panel display, indicators, and audible trouble signal operate correctly

Zone, Loop, and Detector Function

• Selected zone or loop test initiated and acknowledged at the panel
• Correct zone or loop identification displayed at the control panel
• Smoke detector or heat detector activated and transmitted alarm correctly
• Detector head, base, and nearby area free of damage, obstruction, or contamination

Alarm, Notification, and Supervisory Devices

• Audible alarm sounded in the tested area
• Visible notification appliance activated where installed
• Alarm signal received at the required monitoring location or bridge
• Any supervisory or fault condition generated during test was identified and logged

Corrective Actions and Closeout

• Deficiencies or non-conformances documented with location and system component
• Corrective action assigned, including responsible person and target completion time
• System restored to normal operating condition after testing
• Inspector signature completed