ASTM D3512 Pilling Resistance Test Documentation

Inspection template for recording random-tumble pilling resistance results on a 1 to 5 grade scale after defined test cycles, and documenting pass/fail against the minimum required pilling grade.

Inspection Identification

• Test report ID
  Unique identifier for this pilling resistance inspection record.
• Sample identification
  Fabric style, lot, roll, colorway, or other sample identifier.
• Reference specification or acceptance criterion
  Document the minimum acceptable pilling grade or customer requirement used for pass/fail determination.

Test Method and Conditions

• ASTM D3512 method followed
  Confirm the random-tumble pilling test was performed in accordance with ASTM D3512.
• Number of tumble cycles
  Total number of defined cycles used for the test.
• Conditioning environment recorded
  Confirm sample conditioning and test environment were documented before testing.
• Test apparatus and abrasive media verified
  Confirm the pilling tester, chamber, and consumables were suitable and in serviceable condition.

Pilling Rating Results

• Initial pilling grade
  Record the observed pilling grade after the defined cycles using the 1 to 5 scale.
• Replicate or side A rating
  Record the pilling grade for the first replicate, specimen, or fabric side if applicable.
• Replicate or side B rating
  Record the pilling grade for the second replicate, specimen, or fabric side if applicable.
• Average pilling grade
  Enter the calculated average pilling grade if multiple readings were taken.

Compliance and Non-Conformance

• Meets minimum pilling grade
  Confirm the result meets the specified minimum pilling grade acceptance criterion.
• Surface appearance notes
  Describe visible fuzzing, pilling density, fiber entanglement, or other surface changes observed after testing.
• Non-conformance documented
  Indicate whether any deviation, failed result, or out-of-spec condition was recorded.

Review and Sign-Off

• Inspector comments
  Summarize any unusual observations, retest rationale, or handling notes.
• Inspector signature
  Inspector attestation that the test record is complete and accurate.
• Review date and time
  Date and time the inspection record was completed or reviewed.