Annual Vehicle Lift Inspection Record

Annual inspection record for documenting the condition, safety, and compliance status of each service lift, including serialized inspection label verification and corrective actions aligned with ANSI/ALI ALOIM expectations and workplace safety practices.

Inspection Details and Lift Identification

• Inspection date recorded
• Inspector name and qualification documented
• Lift unique identifier and location documented
• Lift type identified
• Rated capacity posted and legible
• Serialized annual inspection label present and current

Structural Condition and Mounting

• Columns, runways, arms, and structural members free of cracks, bends, or deformation
• Anchor bolts, base plates, and fasteners secure and undamaged
• Concrete floor and mounting area free of visible cracking, spalling, or settlement affecting lift stability
• Welds, pins, bushings, and pivot points show no visible damage or excessive wear
• Runways, pads, and lift points are intact and properly aligned
• Corrosion, rust, or fluid contamination does not impair safe operation

Hydraulic, Mechanical, and Electrical Systems

• Hydraulic cylinders, hoses, and fittings show no leaks, bulges, abrasion, or damage
• Mechanical locking devices engage and release properly
• Equalization cables, chains, or synchronization components are intact and properly tensioned
• Power unit, wiring, switches, and controls are secure and free of exposed damage
• Emergency stop and lowering controls function as intended

Safety Devices and Operational Test

• Safety latches, pawls, or secondary locking devices operate correctly
• Lift raises, holds, and lowers smoothly without abnormal noise, drift, or binding
• Mechanical stops and travel limits function correctly
• Vehicle support adapters, pads, and contact surfaces are serviceable
• Operational test load or test procedure completed per manufacturer guidance

Housekeeping, Documentation, and Final Disposition

• Area around lift is free of obstruction, slip hazards, and stored materials
• Required warning labels, operating instructions, and safety signage are present and legible
• Deficiencies documented with corrective actions and responsible party
• Lift status determined
• Inspector signature