Slitter Tension and Taper Profile Record

Records unwind, slit, and rewind zone tensions plus taper settings by material to help prevent telescoping, crushed cores, and winding defects.

Job and Material Identification

• Job Number
• Work Order or Roll ID
• Material Name
• Material Type
• Material Gauge or Basis Weight
  Enter the spec used for setup, such as gauge, caliper, or basis weight.

Machine and Run Conditions

• Slitter ID
• Date of Setup
• Setup Time
• Operator Name
• Line Speed
  Enter the run speed used during setup or verification.
• Speed Unit

Tension and Taper Profile Settings

• Unwind Tension
• Unwind Tension Unit
• Slit Zone Tension
• Slit Zone Tension Unit
• Rewind Tension
• Rewind Tension Unit
• Taper Profile Type
• Taper Start Percent
  Enter the roll build percentage where taper begins.
• Taper Rate
  Enter the taper reduction rate used for the profile.
• Custom Taper Notes
  Describe the custom taper profile or reference the approved setup sheet.

Defect Check and Verification

• Defects Observed
• Defect Severity
• Corrective Action Taken
  Describe any tension or taper adjustments made to correct the issue.
• Verified By