Clear Coat Application and Bake Standard Form

A refinish technician form for documenting clear coat application, flash times, bake temperatures, and cure settings to standardize finish hardness and process consistency.

Job and Vehicle Identification

• Repair Order Number
  Enter the repair order or work order number for this job.
• VIN Last 6 Characters
  Optional. Use only if needed to identify the vehicle without collecting the full VIN.
• Vehicle Year
  Optional. Enter the model year if needed for process reference.
• Vehicle Make and Model
  Optional. Enter only if needed for the quality record.
• Technician Name
  Enter the name of the technician completing this record.

Clear Coat Product and Application

• Clear Coat Product
  Enter the product name or system used.
• Mix Ratio
  Optional. Record the mix ratio if it is required by the product system.
• Number of Clear Coat Coats
  Enter the number of clear coat coats applied.
• Application Method
  Select the method used to apply the clear coat.
• Application Notes
  Optional. Record any relevant application observations, such as coverage, edge control, or recoat concerns.

Flash and Bake Settings

• Flash Time Before Bake (minutes)
  Enter the flash time used before bake.
• Bake Temperature (°F)
  Enter the booth or bake temperature in degrees Fahrenheit.
• Bake Temperature (°C)
  Optional. Enter the bake temperature in degrees Celsius if your process uses metric units.
• Bake Duration (minutes)
  Enter the total bake time used.
• Post-Bake Cooldown (minutes)
  Optional. Record the cooldown time before handling or inspection.

Environmental and Booth Conditions

• Booth Temperature (°F)
  Optional. Enter the booth temperature at the time of application.
• Relative Humidity (%)
  Optional. Enter the humidity level if tracked for process control.
• Airflow Condition
  Select the booth airflow condition if relevant.
• Environmental Notes
  Optional. Add any environmental factors that may have affected flash or cure performance.

Cure Verification and Technician Attestation

• Finish Hardness Verified
  Confirm whether the finish hardness or cure condition met the expected standard.
• Verification Method
  Select the methods used to verify cure or finish readiness.
• Exceptions or Rework Needed
  Describe any deviations from the standard process or any rework required.
• Technician Attestation
  Required acknowledgment for audit trail purposes.