Run: Forklift Battery Change & Charging

The operator verifies that they are trained and authorized to change and charge electric forklift batteries. The operator confirms the battery charging area is clear, dry, well lit, and restricted to authorized personnel only. The operator confirms an eyewash station is accessible and unobstructed, and that spill response materials are available.

The operator shuts down the forklift and inspects the battery, cables, connectors, and compartment for damage, corrosion, leaks, or loose components. The operator removes the battery from service and escalates to a supervisor or competent person if any unsafe condition is found.

The operator parks the forklift in the designated battery change area, lowers all attachments, sets the parking brake, turns the key off, and removes the key. The operator secures the forklift against movement using the site-approved restraint method.

The operator activates the required ventilation for the charging area and confirms airflow is operating as intended. The operator stages the spill kit and neutralizing agent within immediate reach of the work area.

The operator disconnects the battery connectors using insulated tools as required by site procedure. The operator uses the approved lifting device to remove the battery without tilting, dragging, or lifting by cables. The operator places the battery on the approved transfer stand or cart.

The operator checks the battery case, caps, terminals, and electrolyte level according to the battery manufacturer’s instructions. The operator does not add water or service the battery unless trained and authorized to do so. The operator escalates any leak, crack, or abnormal condition to a supervisor or competent person.

The operator confirms the charger is compatible with the battery type and voltage. The operator connects the charger following the manufacturer’s sequence and ensures the connection is secure before energizing the charger.

The operator starts the charger and confirms the charging indicator shows normal operation. The operator keeps the area free of ignition sources and monitors for unusual odor, heat, smoke, or electrolyte leakage.

The operator stops work and evaluates whether the battery is leaking, the charger is overheating, or electrolyte has spilled. The operator uses the spill kit and neutralizing agent only if trained and it is safe to do so. The operator flushes exposed skin or eyes at the eyewash station immediately and escalates the incident per site emergency procedure.

The operator disconnects the charger after charging is complete and stores the cable safely. The operator transfers the charged battery back into the forklift using approved lifting equipment, reconnects the battery securely, and confirms the compartment is closed and latched.

The operator records the battery change, charging completion, any abnormal observations, spill response actions, and any equipment defects in the required log or maintenance record. The operator reports deviations, non-conformance, or unresolved hazards to the supervisor before releasing the forklift.