Run X-Radiation Measurement Log (ANSI C37.85) — Free

Inspection Details

Test date and time recorded critical (required)

Facility, test cell, or location identified critical (required)

Vacuum interrupter or equipment serial number recorded critical (required)

Test standard and procedure referenced critical (required)

Reference the applicable test procedure and standard, such as ANSI C37.85 and site SOP.

Test Setup and Safety Controls

Measurement point established at one meter from the vacuum interrupter critical (required)

Confirm the X-radiation measurement was taken at the required one-meter distance.

Yes No N/A

X-radiation meter calibrated and in date critical (required)

Verify the instrument calibration status is current and traceable.

Yes No N/A

Test area controlled and unauthorized personnel excluded critical (required)

Confirm barriers, signage, or access controls were used to keep non-essential personnel out of the test area.

Yes No N/A

Required PPE worn by test personnel critical (required)

Verify PPE appropriate to the electrical test environment was used.

Yes No N/A

X-Radiation Readings

Background X-radiation reading at one meter critical (required)

Peak X-radiation reading during withstand test at one meter critical (required)

Allowable emission limit entered for comparison critical (required)

Peak reading within allowable limit critical (required)

Confirm the measured X-radiation did not exceed the applicable allowable limit.

Yes No N/A

Test Conditions and Observations

Withstand test voltage recorded critical (required)

Test duration recorded

Abnormal arcing, leakage, or equipment damage observed critical (required)

Record whether any abnormal conditions were observed during the test.

Yes No N/A

Inspector comments and observed conditions

Deficiencies, Corrective Action, and Sign-off

Deficiencies documented

Indicate whether any deficiency or non-conformance was identified during the inspection.

Yes No N/A

Corrective action recorded for any failed item

Describe the corrective action, retest requirement, or escalation taken for any non-conformance.

Inspector signature critical (required)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: X-Radiation Measurement Log (ANSI C37.85)

Inspection Details

Test Setup and Safety Controls

X-Radiation Readings

Test Conditions and Observations

Deficiencies, Corrective Action, and Sign-off

Get your results