Run Wood Dust Collection and LEV Inspection and Maintenance Log — Free

Inspection Identification

Inspection date and time recorded

Inspector name and role recorded

Area or machine served by this dust collection system identified

System ID, collector number, or asset tag recorded

Inspection frequency matches site SOP

Confirm this inspection is being completed at the required daily, weekly, or monthly interval per site procedure.

Yes No N/A

Dust Collector Housing and Mechanical Condition

Collector housing, access doors, and seals intact with no visible damage critical (required)

Yes No N/A

Hoppers, bins, or drums properly seated and not overfilled critical (required)

Yes No N/A

Collector vibration, abnormal noise, or overheating observed critical (required)

Yes No N/A

Fans, motors, belts, and guards in serviceable condition critical (required)

Yes No N/A

Collector start/stop controls function correctly critical (required)

Yes No N/A

Airflow, Ducting, and Filter Performance

Measured duct velocity at representative point meets site minimum critical (required)

Record the measured duct velocity. Use the site minimum acceptable velocity for the specific machine and duct design.

Static pressure or differential pressure within normal operating range

Record the current reading and compare it to the normal baseline for this system.

Ductwork, flex hose, and fittings free of leaks, collapse, or blockage critical (required)

Yes No N/A

Filter condition acceptable with no excessive loading or visible damage critical (required)

Yes No N/A

Filter cleaning cycle or pulse-jet system operates as intended

Yes No N/A

Combustible Dust, Fire, and Electrical Controls

Visible wood dust accumulation kept below site housekeeping limit critical (required)

Yes No N/A

Grounding and bonding connections intact where required critical (required)

Yes No N/A

Spark detection, spark arresting, or fire suppression devices operational if installed critical (required)

Yes No N/A

Electrical cords, switches, and controls show no damage or dust intrusion critical (required)

Yes No N/A

Maintenance, Documentation, and Follow-Up

Preventive maintenance completed for this system since last inspection

Yes No N/A

Deficiencies or non-conformances documented with corrective action assigned critical (required)

Yes No N/A

Lockout-tagout used before servicing when required critical (required)

Confirm servicing or internal maintenance was performed under OSHA 1910.147 lockout-tagout procedures when exposure to hazardous energy existed.

Yes No N/A

Inspector signature completed

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Wood Dust Collection and LEV Inspection and Maintenance Log

Inspection Identification

Dust Collector Housing and Mechanical Condition

Airflow, Ducting, and Filter Performance

Combustible Dust, Fire, and Electrical Controls

Maintenance, Documentation, and Follow-Up

Get your results