Run Warehouse High Speed Door Inspection — Free

Door Identification and General Condition

Door identification is confirmed critical (required)

Confirm the correct high speed door location, asset ID, or door number.

Yes No N/A

Door curtain, panels, and frame are in good condition critical (required)

Check for tears, dents, cracks, corrosion, or other visible damage.

Yes No N/A

Tracks, guides, and mounting hardware are secure critical (required)

Inspect for loose fasteners, misalignment, or signs of shifting.

Yes No N/A

Area around the door is clear of damage or hazards

Look for pallets, debris, impact damage, or other hazards near the door opening.

Yes No N/A

Door Operation and Cycle Performance

Door opens and closes smoothly critical (required)

Verify the door completes a full cycle without sticking, jerking, or unusual delay.

Yes No N/A

Opening and closing speed is within normal range

Rate whether the door speed appears consistent with normal operating performance.

Cycle counter is functioning and readable critical (required)

Confirm the cycle counter display is visible, accurate, and incrementing properly.

Yes No N/A

Unusual noise or vibration observed during operation

Check for grinding, rattling, squealing, or excessive vibration during the cycle.

Yes No N/A

Manual override or emergency release functions properly critical (required)

Verify the door can be safely operated or released manually if required by the system design.

Yes No N/A

Sensors and Safety Devices

Presence or motion sensors are clean and aligned critical (required)

Check that sensors are free of dust, damage, and misalignment.

Yes No N/A

Safety sensors stop or reverse the door when obstructed critical (required)

Test the sensor response according to site procedure to confirm proper safety behavior.

Yes No N/A

Obstruction detection is functioning correctly critical (required)

Verify the door detects obstructions and responds as intended without bypass or delay.

Yes No N/A

Sensor indicator lights or status display are normal

Confirm sensor LEDs, control panel indicators, or fault codes show normal operation.

Yes No N/A

No evidence of sensor tampering or bypass critical (required)

Check for disconnected wiring, blocked sensors, taped components, or other bypass attempts.

Yes No N/A

Controls, Housekeeping, and Follow-Up

Control panel and push buttons are labeled and functional

Verify controls are clearly labeled, responsive, and not damaged.

Yes No N/A

Door opening area is free of obstructions critical (required)

Confirm the door path and surrounding area are clear for safe operation.

Yes No N/A

Inspection findings require follow-up action

Select the overall follow-up status for this door.

Inspector comments

Record any defects, observations, or corrective actions needed.

Get your results

Enter your email — we'll send you a PDF of your filled-out template. We won't sign you up to anything; you can opt in to the trial from the email if you want.

Email (required)

Your name (optional)

Run: Warehouse High Speed Door Inspection

Door Identification and General Condition

Door Operation and Cycle Performance

Sensors and Safety Devices

Controls, Housekeeping, and Follow-Up

Get your results