Run Tire and Lube Center Daily Pre-Open Audit — Free

Inspection Start and Shift Readiness

Pre-open inspection completed before customer vehicles are accepted critical (required)

Yes No N/A

Opening inspector identified and on-site critical (required)

Yes No N/A

All required opening areas accessible and unobstructed critical (required)

Yes No N/A

Bay Safety and Housekeeping

Service bays free of slip, trip, and fall hazards critical (required)

Check for oil spills, loose tools, cords, hoses, debris, and wet floors in active work areas.

Yes No N/A

Photo evidence (optional)

Aisles and emergency egress paths clear critical (required)

Verify walkways, exits, and access paths are unobstructed and usable for employees and emergency response.

Yes No N/A

Spill kit stocked and accessible in service area critical (required)

Absorbents, disposal bags, gloves, and cleanup tools are present and within immediate reach of bays.

Yes No N/A

Fire extinguishers visible, mounted, and unobstructed critical (required)

Confirm extinguishers are in designated locations, accessible, and not blocked by inventory or equipment.

Yes No N/A

Compressed air hoses, power cords, and extension leads in safe condition critical (required)

Look for damaged insulation, exposed conductors, leaks, or trip hazards before energizing equipment.

Yes No N/A

Vehicle Lifts and Shop Equipment

Each lift passes visual pre-use inspection critical (required)

Check arms, pads, locks, cables, hydraulic lines, anchors, and general condition before first use.

Yes No N/A

Photo evidence (optional)

Lift area clear of obstructions and properly marked critical (required)

Verify the lift envelope is free of tools, parts, and stored materials; floor markings are visible where used.

Yes No N/A

Torque tools and calibration-sensitive equipment within calibration date critical (required)

Confirm torque wrenches, tire pressure gauges, and other measurement tools are in date and tagged if applicable.

Yes No N/A

Air compressor and tire inflation equipment operating normally critical (required)

Verify pressure output, hoses, fittings, and safety devices are functioning without leaks or abnormal noise.

Yes No N/A

Oil drain, waste oil handling, and fluid transfer equipment ready for use critical (required)

Check containers, pumps, funnels, and drains for leaks, secure lids, and proper placement.

Yes No N/A

Oil, Fluids, and Consumable Inventory

Engine oil inventory meets opening minimum level critical (required)

Record the quantity on hand for each required oil grade and verify it meets the site minimum for the day.

Top-off fluids available and correctly labeled critical (required)

Verify washer fluid, coolant, brake fluid, power steering fluid, and other approved fluids are present and labeled.

Used oil and waste fluid containers properly labeled and not overfilled critical (required)

Confirm waste containers are closed, labeled, and within safe fill limits before operations begin.

Yes No N/A

Critical consumables stocked for first shift

Check filters, drain plugs, shop towels, gloves, funnels, and related consumables needed for scheduled work.

Yes No N/A

Technician Certification and PPE Verification

All technicians scheduled for the shift have current required certifications critical (required)

Verify any required training or certifications for lifts, tire service, oil service, or other assigned work are current.

Yes No N/A

Technician badges are visible and match the assigned shift roster critical (required)

Confirm every technician on duty is wearing a visible badge or ID required by site policy.

Yes No N/A

Required PPE available and in use at opening critical (required)

Verify safety glasses, gloves, protective footwear, and any task-specific PPE are available and worn as required.

Yes No N/A

Technicians briefed on known hazards and assigned work

Confirm the team has been informed of any bay restrictions, equipment out of service, or special hazards for the day.

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Tire and Lube Center Daily Pre-Open Audit

Inspection Start and Shift Readiness

Bay Safety and Housekeeping

Vehicle Lifts and Shop Equipment

Oil, Fluids, and Consumable Inventory

Technician Certification and PPE Verification

Get your results