Templates › Inspections › SEO page

Run: Tempered Glass Fragmentation Test Log

Log tempered glass fragmentation tests in one place, from sample ID and break method to 50 x 50 mm fragment counts and final disposition. Use it to document ...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Header and Sample Identification

Test date and time recorded critical (required)

Inspector name and role recorded critical (required)

Sample ID, lot number, and product description recorded critical (required)

Glass type confirmed as tempered sample critical (required)

Confirm the specimen is identified as tempered glass before fracture testing.

Yes No N/A

Reference standard documented critical (required)

Test Method and Break Procedure

Break method documented and controlled critical (required)

Record the method used to fracture the sample and any controlled setup details.

Breakage performed under safe, controlled conditions critical (required)

Verify the sample was broken in a controlled manner with appropriate PPE and handling.

Yes No N/A

Fragment count recorded within 3 to 5 minutes after fracture critical (required)

Enter the elapsed time used for the count.

Photo evidence of fracture pattern captured

Upload a clear image of the fractured specimen and fragment field.

Fragment Count Measurement

50 x 50 mm area identified on sample critical (required)

Confirm the inspection area used for counting fragments is the specified 50 x 50 mm region.

Yes No N/A

Fragment count within 50 x 50 mm area critical (required)

Fragments are small, granular, and uniformly distributed critical (required)

Verify the break pattern is consistent with tempered glass fragmentation.

Yes No N/A

Edge condition and any large shards documented

Record any abnormal shard size, edge behavior, or unusual fracture characteristics.

Minimum particle requirement met critical (required)

Pass when the fragment count in the 50 x 50 mm area meets or exceeds the minimum requirement.

Yes No N/A

Compliance, Non-Conformance, and Sign-Off

Test result disposition critical (required)

Note (optional)

Non-conformance documented when applicable

Describe any deficiency, out-of-spec fragment count, or test deviation.

Corrective action or disposition recorded

Record re-test, hold, reject, or other disposition if the sample fails.

Inspector signature critical (required)

Reviewer or QA approval

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free