Run Switchgear Acceptance Test — Free

Job Information and Safety Preconditions

Switchgear lineup, feeder, and equipment identifiers match the test scope critical (required)

Lockout-tagout applied and verified before work begins critical (required)

Yes No N/A

Arc-flash and shock boundaries established and communicated critical (required)

Yes No N/A

Qualified personnel and required PPE are present for the task critical (required)

Yes No N/A

Test instruments are calibrated and within current certification date critical (required)

Yes No N/A

Work area is clear, dry, and free of unauthorized personnel critical (required)

Yes No N/A

Visual and Mechanical Inspection

Nameplates, circuit labels, and feeder identification are legible and match drawings critical (required)

Yes No N/A

Enclosure, barriers, and covers are installed with no visible damage or missing hardware critical (required)

Yes No N/A

Bus, terminations, and cable connections are clean, secure, and properly torqued critical (required)

Yes No N/A

Grounding and bonding conductors are installed and continuous critical (required)

Yes No N/A

Mechanical operation of breakers, racking mechanisms, and interlocks is smooth and unobstructed critical (required)

Yes No N/A

Foreign material, debris, and shipping restraints have been removed critical (required)

Yes No N/A

Insulation Resistance Testing

Test voltage applied per approved procedure critical (required)

Note (optional)

Insulation resistance - phase A to ground critical (required)

Note (optional)

Insulation resistance - phase B to ground critical (required)

Note (optional)

Insulation resistance - phase C to ground critical (required)

Note (optional)

Insulation resistance between phases is within acceptable limits critical (required)

Yes No N/A

Continuity and Functional Verification

Ground continuity verified from enclosure to grounding system critical (required)

Yes No N/A

Control wiring continuity verified against wiring diagrams critical (required)

Yes No N/A

Breaker close/trip functions operate correctly critical (required)

Yes No N/A

Protective relays, indicators, and auxiliary devices function as intended critical (required)

Yes No N/A

Interlocks prevent unsafe or unintended operation critical (required)

Yes No N/A

Primary Injection Testing

Primary injection test setup matches approved test plan critical (required)

Yes No N/A

Injected current value critical (required)

Note (optional)

Trip pickup and trip time are within expected tolerance critical (required)

Yes No N/A

Phase rotation and current balance verified where applicable critical (required)

Yes No N/A

No abnormal heating, noise, or nuisance operation observed during test critical (required)

Yes No N/A

Final Acceptance and Closeout

All deficiencies and non-conformances documented with corrective actions critical (required)

Yes No N/A

Equipment released for energization critical (required)

Yes No N/A

Inspector signature critical (required)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Switchgear Acceptance Test

Job Information and Safety Preconditions

Visual and Mechanical Inspection

Insulation Resistance Testing

Continuity and Functional Verification

Primary Injection Testing

Final Acceptance and Closeout

Get your results