Templates › Inspections › SEO page

Run: Stored Asphalt Shingle Stacking and UV Protection Audit

Audit stored asphalt shingle stacks for height, pallet stability, slip-sheet use, and UV protection so you can catch distortion, sticking, and damage before ...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Details

Storage area identified and inspection scope confirmed

Record the storage location, product type, and whether the inspection covers warehouse, yard, or jobsite laydown storage.

Inspection date and time recorded

Document when the storage audit was performed.

Inspector name and signature captured

Inspector must sign to confirm findings and any noted deficiencies.

Stack Height and Pallet Stacking Compliance

Maximum shingle stack height does not exceed 15 feet critical (required)

Measure the tallest shingle stack in the storage area. Manufacturer guidance commonly limits stack height to 15 feet.

Pallets are not stacked in a manner that creates instability or product damage critical (required)

Verify pallets are arranged to prevent tipping, crushing, or deformation of shingle bundles.

Yes No N/A

Stacks are level, aligned, and supported on a stable surface critical (required)

Check that stacks are not leaning, bowed, or placed on uneven ground or damaged pallets.

Yes No N/A

Stacking method prevents compression of lower bundles critical (required)

Confirm lower bundles are not crushed, flattened, or visibly distorted by overstacking.

Yes No N/A

Slip-Sheets, Separation, and Product Handling

Slip-sheets or approved separation materials are used where required critical (required)

Verify slip-sheets or other manufacturer-approved separators are present when needed to reduce sticking and bundle adhesion.

Yes No N/A

Bundles are not sticking together or showing adhesive squeeze-out critical (required)

Inspect visible bundle faces and edges for sticking, sealant transfer, or adhesive squeeze-out caused by heat or pressure.

Yes No N/A

No torn wrap, broken straps, or displaced bundles observed

Check for packaging damage that could allow movement, contamination, or exposure to weather and sunlight.

Yes No N/A

UV Exposure and Weather Protection

Shingles are protected from direct sun exposure whenever practicable critical (required)

Confirm storage controls minimize UV exposure through covered storage, tarping, indoor placement, or other approved methods.

Yes No N/A

Covered storage or UV shielding is intact and effective critical (required)

Verify tarps, canopies, or building cover fully protect bundles from sunlight and weather without trapping heat excessively.

Yes No N/A

No heat-related distortion, curling, or softening observed critical (required)

Inspect exposed bundles for warping, curling, or other deformation consistent with prolonged heat or UV exposure.

Yes No N/A

Housekeeping, Identification, and Corrective Action

Storage area is clean, dry, and free of standing water

Check for moisture intrusion, mud, debris, or standing water that could damage packaging or product quality.

Yes No N/A

Product labels, lot identifiers, and inventory markings remain visible

Ensure bundles and pallets can be identified without moving unstable stacks.

Yes No N/A

Deficiencies documented with corrective action and disposition

Record all non-conformances, immediate containment actions, and follow-up corrective actions for damaged or noncompliant stock.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free