Run Steel Erection Pre-Lift Inspection — Free

Pre-Lift Planning and Competent Person Review

Lift area reviewed by competent person before work starts critical (required)

Confirm a competent person has reviewed the erection sequence, access, and fall hazards before the lift begins.

Yes No N/A

Erection sequence and connector procedure communicated to crew critical (required)

Verify the crew has been briefed on the planned sequence, connection points, and safe positioning for connectors.

Yes No N/A

Weather and site conditions acceptable for lift critical (required)

Confirm wind, precipitation, visibility, and ground conditions do not create an unsafe condition for steel erection.

Yes No N/A

Required tools, bolts, and materials staged and secured

Verify bolts, drift pins, tools, and other materials are staged to prevent dropped-object hazards and unnecessary exposure at elevation.

Yes No N/A

Communication method established between crane operator, signal person, and crew critical (required)

Confirm the communication method is understood and available for the lift and placement sequence.

Yes No N/A

Connector Procedures and Access

Connector access path is clear and free of trip hazards critical (required)

Verify access to the connection point is unobstructed and does not expose workers to unnecessary fall or trip hazards.

Yes No N/A

Connectors have a safe position and stable footing at the connection point critical (required)

Confirm the connection area provides stable footing and a safe working position for the connector.

Yes No N/A

Temporary fall protection for connectors is in place where required critical (required)

Verify required fall protection measures are installed and usable for connector work at height.

Yes No N/A

Connection hardware available and compatible with members being erected

Confirm bolts, washers, and other connection hardware are available and appropriate for the steel members being installed.

Yes No N/A

Members are controlled to prevent unexpected movement during connection critical (required)

Verify the load and adjacent members are controlled and aligned before connectors begin work.

Yes No N/A

Decking and Working Surface

Decking materials are properly staged and secured before placement

Confirm decking panels or bundles are staged to minimize handling hazards and prevent shifting or sliding.

Yes No N/A

Installed decking is secured against displacement critical (required)

Verify decking is fastened or otherwise secured so it cannot shift, slide, or become dislodged during work.

Yes No N/A

Openings in decking are protected or covered critical (required)

Check for unprotected openings, gaps, or penetrations that could create a fall hazard.

Yes No N/A

Walking and working surfaces are free of loose materials and slipping hazards

Verify the surface is reasonably clear of debris, oil, ice, or other conditions that could cause a slip or trip.

Yes No N/A

Decking installation sequence maintains required stability critical (required)

Confirm the planned installation sequence does not create an unstable condition for workers or the structure.

Yes No N/A

Perimeter Protection and Fall Hazard Controls

Perimeter fall protection is installed where required critical (required)

Verify guardrails, safety nets, personal fall arrest systems, or other required controls are in place for exposed edges.

Yes No N/A

Leading edges and floor openings are clearly identified

Confirm exposed edges and openings are visibly marked or controlled to prevent inadvertent exposure.

Yes No N/A

Perimeter protection is continuous and not bypassed critical (required)

Check that the protection system is continuous around exposed areas and has not been removed or left incomplete.

Yes No N/A

Fall arrest anchorage points are available and appropriate if used

Verify anchorage points, if part of the protection plan, are suitable for the intended use and accessible to the crew.

Yes No N/A

Housekeeping, Tools, and Closeout

Tools and loose materials secured against falling

Confirm hand tools, fasteners, and small parts are secured to prevent dropped-object hazards.

Yes No N/A

Area below lift is barricaded or controlled critical (required)

Verify the drop zone is controlled to keep unauthorized personnel out of the hazard area.

Yes No N/A

Inspector comments and deficiencies documented

Record any deficiency, non-conformance, or corrective action needed before the lift proceeds.

Get your results

Enter your email — we'll send you a PDF of your filled-out template. We won't sign you up to anything; you can opt in to the trial from the email if you want.

Email (required)

Your name (optional)

Run: Steel Erection Pre-Lift Inspection

Pre-Lift Planning and Competent Person Review

Connector Procedures and Access

Decking and Working Surface

Perimeter Protection and Fall Hazard Controls

Housekeeping, Tools, and Closeout

Get your results