Run Spa Hot Tub Whirlpool Daily Log — Free

Inspection Details

Inspection date and time recorded critical (required)

Record the date and time the daily log was completed.

Facility, spa, or vessel identified critical (required)

Enter the specific spa, hot tub, or whirlpool location inspected.

Inspector name and role recorded critical (required)

Identify the person completing the inspection and their role.

Operating status documented critical (required)

Document whether the spa is open, restricted, or closed.

Note (optional)

Water Chemistry

Sanitizer residual within facility operating range critical (required)

Record the active sanitizer residual (for example, chlorine or bromine) in ppm.

pH within facility operating range critical (required)

Record the measured pH of the water.

Water clarity is acceptable critical (required)

Water must be clear enough to see the main drain or bottom per facility standard.

Yes No N/A

Combined disinfectant or oxidation indicator checked

Confirm any required secondary water quality indicator was checked and within range, if applicable.

Yes No N/A

Water chemistry test method used

Document the method used to measure water chemistry.

Note (optional)

Temperature and Comfort

Water temperature within approved operating range critical (required)

Record the water temperature and verify it remains within the facility's approved range.

Temperature control system functioning critical (required)

Confirm the heater, thermostat, and temperature display are operating normally.

Yes No N/A

Air and deck area free of excessive heat or slip hazards

Check for unsafe surface conditions, condensation, or heat-related discomfort in the immediate area.

Yes No N/A

Filtration and Equipment

Circulation pump operating critical (required)

Verify the circulation pump is running and water movement is visible.

Yes No N/A

Filter system operating normally critical (required)

Confirm filters, strainers, and associated equipment are functioning without alarm or blockage.

Yes No N/A

Skimmer, strainer, and return fittings unobstructed

Check for visible debris, blockage, or damage at water circulation points.

Yes No N/A

No visible leaks, unusual noise, or alarm conditions

Inspect pumps, piping, and controls for leaks, abnormal vibration, or active alarms.

Yes No N/A

Usage and Safety

Bather load within posted limit critical (required)

Record the number of bathers present and verify it does not exceed the posted maximum occupancy.

Required safety signage visible and legible

Check that posted rules, warning signs, and operating instructions are visible to users.

Yes No N/A

Emergency stop, shutoff, or isolation controls accessible critical (required)

Verify emergency or isolation controls are accessible and not blocked.

Yes No N/A

Visible contamination or unsafe condition observed critical (required)

Document any contamination, broken fittings, sharp edges, or other unsafe conditions.

Note (optional)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Spa Hot Tub Whirlpool Daily Log

Inspection Details

Water Chemistry

Temperature and Comfort

Filtration and Equipment

Usage and Safety

Get your results