Run Solvent-Based Coating Line Safety Audit — Free

Inspection Details

Inspection date and time recorded

Coating line, booth, or oven area identified

Inspector name and role documented

Area operating status confirmed

Solvent Handling and Storage

Solvent containers are labeled and closed when not in use critical (required)

Yes No N/A

Solvent transfer uses approved containers and dispensing methods critical (required)

Yes No N/A

Flammable liquid storage is segregated from ignition sources and incompatible materials critical (required)

Yes No N/A

Spill kits and absorbents are available and accessible in the work area

Yes No N/A

Waste solvent and contaminated rags are stored in approved, closed metal containers critical (required)

Yes No N/A

Grounding, Bonding, and Ignition Control

All solvent transfer points are bonded and grounded critical (required)

Yes No N/A

Grounding connections are intact, clean, and visibly secure critical (required)

Yes No N/A

Static control measures are in place for conductive equipment and hoses critical (required)

Yes No N/A

Ignition sources are controlled within the coating area critical (required)

Yes No N/A

Hot work permits are posted and active controls are in place where applicable critical (required)

Yes No N/A

Ventilation and LFL Monitoring

Local exhaust ventilation is operating at the coating point and capture is effective critical (required)

Yes No N/A

Supply and exhaust airflow paths are unobstructed critical (required)

Yes No N/A

Ventilation system inspection or maintenance status is current

Yes No N/A

LFL monitoring system is installed where required and powered on critical (required)

Yes No N/A

LFL alarm setpoints and interlocks are functional critical (required)

Yes No N/A

Measured vapor control conditions remain below the applicable LFL action threshold critical (required)

Oven Safety and Process Controls

Oven access doors, panels, and interlocks function as intended critical (required)

Yes No N/A

Combustion air, purge, and exhaust sequences are operating correctly critical (required)

Yes No N/A

Overtemperature protection is present and functional critical (required)

Yes No N/A

Emergency shutdown controls are accessible, labeled, and unobstructed critical (required)

Yes No N/A

Oven housekeeping is free of solvent residue, overspray buildup, and combustible debris

Yes No N/A

Deficiencies and Closeout

Deficiencies documented with location and risk level

Note (optional)

Corrective actions assigned with owner and due date

Inspector signature completed

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Solvent-Based Coating Line Safety Audit

Inspection Details

Solvent Handling and Storage

Grounding, Bonding, and Ignition Control

Ventilation and LFL Monitoring

Oven Safety and Process Controls

Deficiencies and Closeout

Get your results