Run Skid Steer / Compact Equipment Pre-Op — Free

Equipment Identification & Pre-Start Conditions

Equipment identified and serial/unit number recorded

Record the unit identifier, make/model, and location before inspection begins.

Inspection performed before equipment was placed into service critical (required)

Confirm the pre-op inspection was completed before startup and operation.

Yes No N/A

Operator manual and required decals present and legible critical (required)

Verify the operator's manual is available and safety decals/warnings are readable.

Yes No N/A

Walk-Around Condition

No visible fluid leaks under or around the machine critical (required)

Check for hydraulic, engine oil, coolant, fuel, or other fluid leaks at ground level and around components.

Yes No N/A

Machine frame, boom, arms, and body panels free of visible damage or cracks critical (required)

Inspect structural components for cracks, deformation, missing fasteners, or impact damage.

Yes No N/A

Steps, handholds, and access points clean and unobstructed critical (required)

Verify safe access to the cab/operator station without mud, grease, debris, or obstructions.

Yes No N/A

Operator Station, Safety Devices, and Protective Structures

ROPS/FOPS structure intact with no visible damage or unauthorized modifications critical (required)

Inspect rollover and falling-object protective structures for cracks, dents, missing hardware, or field modifications.

Yes No N/A

Seat belt present, functional, and free of damage critical (required)

Verify the seat belt or restraint system latches, retracts, and shows no fraying, cuts, or broken hardware.

Yes No N/A

Operator presence control / interlock system functions correctly critical (required)

Confirm the operator presence system, safety bar, lap bar, or interlock prevents unintended machine movement as designed.

Yes No N/A

Horn, backup alarm, lights, and warning indicators operate correctly critical (required)

Test audible and visual warning devices required for safe operation and site movement.

Yes No N/A

Hydraulic System and Controls

Hydraulic fluid level within acceptable operating range critical (required)

Record hydraulic fluid level if a sight gauge or dipstick is provided.

Hydraulic hoses, fittings, and cylinders free of leaks, abrasion, bulges, or damage critical (required)

Inspect all visible hydraulic lines and cylinders for seepage, chafing, cracking, or damaged fittings.

Yes No N/A

Controls, joysticks, pedals, and travel functions operate smoothly and return to neutral critical (required)

Verify control response is normal and no binding, sticking, or unintended movement is present.

Yes No N/A

Attachments, Bucket, and Ground Engaging Tools

Attachment coupler locks and pins fully engaged critical (required)

Confirm quick coupler, locking pins, and attachment retention devices are fully seated and secure before use.

Yes No N/A

Attachment, bucket, and cutting edge free of cracks, excessive wear, or missing hardware critical (required)

Inspect the installed attachment for structural damage, wear beyond service limits, or loose/missing fasteners.

Yes No N/A

Attachment selected is appropriate for the planned task and machine capacity critical (required)

Verify the attachment matches the intended work and does not exceed the machine's rated operating capacity or manufacturer limits.

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Skid Steer / Compact Equipment Pre-Op

Equipment Identification & Pre-Start Conditions

Walk-Around Condition

Operator Station, Safety Devices, and Protective Structures

Hydraulic System and Controls

Attachments, Bucket, and Ground Engaging Tools

Get your results