Templates › Inspections › SEO page

Run: SF6 Gas Fill and Moisture Dew-Point Check

Use this SF6 gas fill and moisture dew-point check to verify switchgear is charged to spec, dry enough for shipment, and documented for release. It helps cat...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Details

Equipment identification recorded

Record the switchgear model, serial number, bay/cell identifier, and shipment lot or work order.

Inspection date and time recorded critical (required)

Capture the date and time the SF6 fill and moisture/dew-point check was completed.

Inspector name and qualification recorded

Record the inspector name and confirm the inspection was performed by an authorized or competent person.

SF6 Fill Pressure Verification

SF6 fill pressure measured critical (required)

Record the final SF6 fill pressure for the unit.

Note (optional)

Fill pressure matches specification critical (required)

Confirm the measured fill pressure is within the approved engineering specification for this unit.

Yes No N/A

Fill valve and fittings show no visible leakage critical (required)

Inspect the fill valve, connections, and accessible fittings for visible signs of leakage, damage, or loose connections.

Yes No N/A

Photo evidence (optional)

Moisture / Dew-Point Verification

Moisture or dew-point reading recorded critical (required)

Record the measured moisture content or dew-point value for the SF6 gas.

Note (optional)

Moisture or dew-point value meets specification critical (required)

Confirm the measured moisture or dew-point value is within the approved limit for shipment.

Yes No N/A

Test instrument calibration status verified critical (required)

Confirm the moisture or dew-point instrument used for the measurement is within calibration and suitable for trace moisture testing.

Yes No N/A

Gas Quality and Unit Condition

SF6 gas quality documentation available

Verify gas purity or supplier certification is available when required by the work instruction or customer specification.

Yes No N/A

Unit shows no visible damage or contamination critical (required)

Check the enclosure, gauges, labels, and accessible surfaces for damage, contamination, or abnormal condition.

Yes No N/A

Photo evidence (optional)

All required labels and shipping marks present

Confirm identification labels, gas warning labels, and shipping marks are present and legible.

Yes No N/A

Release and Documentation

Non-conformances documented

Record any deficiency, non-conformance, or corrective action needed before shipment.

Yes No N/A

Unit approved for shipment critical (required)

Confirm the switchgear may be released for shipment only after all critical checks pass and required documentation is complete.

Yes No N/A

Inspector signature captured critical (required)

Inspector signs to confirm the SF6 fill pressure and moisture/dew-point checks were completed and recorded accurately.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free