Run Roofing Built-Up Membrane Inspection — Free

Inspection Details

Roof identification recorded

Record building name, roof area, section, or grid location inspected.

Inspection date and time captured critical (required)

Document when the inspection was performed.

Weather conditions documented

Record current weather and any recent precipitation, wind, or freeze-thaw conditions relevant to roof condition.

Inspection scope confirmed

Select the areas included in this inspection.

Safe access and fall protection in place critical (required)

Verify roof access, fall protection, and site controls were in place before inspection began.

Yes No N/A

Membrane Construction

Observed ply count matches expected assembly critical (required)

Count visible plies or verify documented assembly against design or repair records.

Photo evidence (optional)

Surfacing and reinforcement condition acceptable

Assess whether surfacing, reinforcement, and embedded materials show normal wear or visible breakdown.

Adhesive or bitumen condition acceptable critical (required)

Evaluate adhesion, mastic, or bitumen for cracking, voids, dry-out, blistering, or loss of bond.

Photo evidence (optional)

Blisters, splits, or alligatoring observed critical (required)

Check for blistering, splitting, alligatoring, or other membrane surface deterioration.

Yes No N/A

Photo evidence (optional)

Previous repairs remain secure

Verify patches, overlays, and prior repairs are intact, bonded, and not separating at edges.

Yes No N/A

Flashings, Seams, and Penetrations

Base flashings are intact and properly terminated critical (required)

Inspect parapet, curb, wall, and edge flashings for secure termination, adhesion, and absence of gaps.

Yes No N/A

Photo evidence (optional)

Seams are sealed and continuous critical (required)

Check seams for open laps, fishmouths, voids, splits, or loss of seal.

Yes No N/A

Photo evidence (optional)

Penetration flashings are watertight critical (required)

Inspect vents, pipes, drains, equipment supports, and other penetrations for cracking, separation, or exposed substrate.

Yes No N/A

Photo evidence (optional)

Counterflashing and termination details secure

Verify metal counterflashing, termination bars, reglets, and fasteners are secure and free of corrosion or displacement.

Yes No N/A

Drainage and Ponding

Primary drains are clear and functional critical (required)

Check that drains are unobstructed by debris, sediment, or membrane blockage and appear capable of carrying water off the roof.

Yes No N/A

Photo evidence (optional)

Scuppers, gutters, and downspouts are unobstructed critical (required)

Inspect secondary drainage paths for blockage, damage, or signs of overflow.

Yes No N/A

Photo evidence (optional)

Visible ponding present critical (required)

Estimate the extent of standing water or persistent ponding observed during inspection.

Photo evidence (optional)

Drainage slope appears adequate

Assess whether roof slope and low spots appear to support positive drainage away from the membrane surface.

Deterioration and Final Assessment

Signs of deterioration observed critical (required)

Select all visible deterioration conditions present on the roof membrane.

Photo evidence (optional)

Leak evidence present critical (required)

Check for interior staining, active leaks, wet insulation indicators, or moisture-related damage associated with the roof area.

Yes No N/A

Photo evidence (optional)

Overall roof condition rating critical (required)

Provide an overall condition assessment based on membrane, flashings, seams, drainage, and deterioration findings.

Note (optional)

Corrective actions documented

Record recommended repairs, urgency, and any follow-up inspection needs.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Roofing Built-Up Membrane Inspection

Inspection Details

Membrane Construction

Flashings, Seams, and Penetrations

Drainage and Ponding

Deterioration and Final Assessment

Get your results