Run Ridge Cap and Starter Strip Inventory Verification — Free

Inspection Details

Inspection date and time recorded

Project, shipment, or work order identified

Inspector name and company recorded

Supplier or delivery source identified

Order and Specification Match

Ridge cap product matches approved order critical (required)

Verify the ridge cap product name, manufacturer, and product line match the purchase order or approved submittal.

Yes No N/A

Starter strip product matches approved order critical (required)

Verify the starter strip product name, manufacturer, and product line match the purchase order or approved submittal.

Yes No N/A

Ridge cap profile matches roof system requirement critical (required)

Confirm the ridge cap profile, dimension, and application type are correct for the roof system being installed.

Starter strip profile matches roof system requirement critical (required)

Confirm the starter strip profile, dimension, and application type are correct for the roof system being installed.

Color match verified against adjacent shingles and order critical (required)

Confirm ridge cap and starter strip color match the ordered material and adjacent roof system components.

Manufacturer packaging labels legible and consistent

Check that packaging labels, lot numbers, and product identifiers are legible and consistent with the order.

Yes No N/A

Quantity Verification

Ridge cap quantity counted critical (required)

Enter the counted quantity of ridge cap bundles or units on site.

Starter strip quantity counted critical (required)

Enter the counted quantity of starter strip bundles or units on site.

Ridge cap quantity meets planned requirement critical (required)

Confirm the counted ridge cap quantity is sufficient for the roof area and waste factor.

Yes No N/A

Starter strip quantity meets planned requirement critical (required)

Confirm the counted starter strip quantity is sufficient for the roof perimeter and waste factor.

Yes No N/A

Condition and Handling

Materials are undamaged and dry critical (required)

Check for crushed bundles, torn packaging, water exposure, or other visible damage that could affect installation quality.

Yes No N/A

Materials stored off the ground and protected from weather

Verify ridge cap and starter strip are stored on pallets or dunnage and protected from rain, standing water, and direct contamination.

Yes No N/A

Packaging and bundles remain identifiable

Confirm bundles remain labeled and traceable to the correct product, color, and lot where applicable.

Yes No N/A

No visible contamination or deformation

Check for oil, adhesive contamination, excessive bending, or deformation that could prevent proper installation.

Yes No N/A

Shortages, Substitutions, and Disposition

Any shortages documented

Record whether any ridge cap or starter strip shortages were identified during verification.

Yes No N/A

Any substitutions documented and approved critical (required)

Record whether any substituted products were identified and approved by the responsible party before use.

Yes No N/A

Disposition recorded for non-conforming materials

Document the disposition for any non-conforming ridge cap or starter strip materials.

Corrective action owner assigned

Identify the person or role responsible for resolving any shortage, mismatch, or substitution issue.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Ridge Cap and Starter Strip Inventory Verification

Inspection Details

Order and Specification Match

Quantity Verification

Condition and Handling

Shortages, Substitutions, and Disposition

Get your results