Templates › Inspections › SEO page

Run: Receiving Dock Thermometer Calibration Log

Use this Receiving Dock Thermometer Calibration Log to verify that food receiving and prep thermometers read accurately in an ice slurry before they’re used ...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Details

Inspection date and time recorded critical (required)

Location identified critical (required)

Document the receiving dock, prep area, or other thermometer location being calibrated.

Inspector name recorded critical (required)

Thermometer ID or asset tag recorded critical (required)

Ice Slurry Setup

Container filled with crushed ice and water slurry critical (required)

Ice slurry should be a mixture of crushed ice and water, not ice alone.

Yes No N/A

Slurry fully surrounds thermometer probe during test critical (required)

Probe must be immersed in the ice slurry without touching the container sides or bottom.

Yes No N/A

Ice slurry stabilized before reading critical (required)

Allow the slurry to stabilize before taking the calibration reading.

Yes No N/A

Calibration reference temperature critical (required)

Expected ice slurry reference is 32°F (0°C).

Thermometer Accuracy Check

Thermometer reading in ice slurry critical (required)

Record the displayed temperature after stabilization.

Reading within acceptable tolerance critical (required)

Thermometer should read 32°F ± 2°F unless the manufacturer's specification is stricter.

Yes No N/A

Thermometer adjusted or removed from service if out of tolerance critical (required)

If the thermometer is inaccurate, document adjustment, replacement, or removal from service.

Yes No N/A

Corrective Actions and Verification

Corrective action documented for failed calibration

Include adjustment, repair, replacement, or removal from service.

Retest completed after adjustment or repair

If the thermometer was adjusted or repaired, verify it was retested in ice slurry.

Yes No N/A

Thermometer returned to service only if accurate critical (required)

Only calibrated thermometers within tolerance should be used for receiving and prep temperature checks.

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free