Templates › Inspections › SEO page

Run: Pre-Hung Door Unit Squareness and Reveal Check

Use this pre-hung door unit squareness and reveal check to verify frame alignment, consistent reveals, and proper slab gaps before the unit is set or release...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Details

Door location or unit identifier recorded

Record the room, opening number, or unit identifier for the pre-hung door being inspected.

Inspection date and time recorded

Capture when the inspection was performed.

Inspector name recorded

Identify the person performing the inspection.

Door type and handing verified

Confirm the installed unit matches the intended door type and handing.

Frame Squareness and Plumb

Frame is square within tolerance critical (required)

Measure diagonal-to-diagonal difference or equivalent squareness check for the assembled frame.

Jambs are plumb and not twisted critical (required)

Confirm the side jambs are plumb and free of visible twist or bow.

Yes No N/A

Head jamb is level critical (required)

Confirm the head jamb is level across the opening.

Yes No N/A

Reveal and Gap Verification

Reveal is consistent at hinge side critical (required)

Measure the visible gap between the slab and jamb at the hinge side at top, middle, and bottom.

Reveal is consistent at latch side critical (required)

Measure the visible gap between the slab and jamb at the latch side at top, middle, and bottom.

Head reveal is consistent critical (required)

Measure the gap between the top of the slab and the head jamb.

Bottom gap is adequate and uniform critical (required)

Measure the clearance between the bottom of the slab and the finished floor or threshold.

Operation and Finish Condition

Door opens and closes without binding critical (required)

Cycle the door through full travel and confirm smooth operation.

Yes No N/A

Door latches properly critical (required)

Confirm the latch engages without forcing and the door seats properly in the frame.

Yes No N/A

Visible damage or installation defects present

Check for split jambs, damaged slab edges, fastener issues, or other visible defects.

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free