Run Performance Parts Display Compliance Audit — Free

Inspection Scope and Area Identification

Inspection location and display area identified

Record the store, department, aisle, endcap, or fixture being inspected.

Inspection date and time recorded

Capture when the walk-through was completed.

Display category includes performance parts such as cold-air intake kits

Confirm the inspection scope includes performance parts merchandising.

Yes No N/A

Applicable store SOP or display standard referenced

Reference the internal procedure, merchandising standard, or compliance checklist used for the audit.

Display Structure and Fixture Integrity

Display fixture is stable and anchored or otherwise secured critical (required)

Fixture does not wobble, tip, or shift under normal contact.

Yes No N/A

Shelving, brackets, hooks, and fasteners show no visible damage or deformation critical (required)

Inspect for bent metal, cracked plastic, missing hardware, or other structural deficiencies.

Yes No N/A

Product weight is supported within fixture capacity critical (required)

Heavy boxed intake systems and accessories are not overloading shelves or peg hooks.

Yes No N/A

No sharp edges, protrusions, or exposed hardware present at customer reach critical (required)

Check for cut hazards, snag points, or exposed fasteners on the display.

Yes No N/A

Display signage and product attachments are secure

Tags, headers, and promotional materials are attached and not likely to fall.

Yes No N/A

Fire Safety, Heat Sources, and Egress

Display is clear of ignition sources and excessive heat exposure critical (required)

No placement near heaters, electrical panels, open flames, or other heat sources that could affect packaging or materials.

Yes No N/A

Fire extinguisher access is unobstructed critical (required)

Extinguishers remain visible, reachable, and not blocked by product or fixtures.

Yes No N/A

Aisles and exit paths remain clear critical (required)

Display does not reduce required egress width or create a trip or blockage hazard.

Yes No N/A

Electrical cords, lighting, and powered display components are in safe condition critical (required)

No frayed cords, overloaded outlets, or unsafe temporary wiring observed.

Yes No N/A

Product Labeling, Packaging, and Consumer Information

Product labels are legible and match the displayed item

Part numbers, brand names, and product descriptions are readable and accurate.

Yes No N/A

Required warnings, fitment notes, and installation limitations are visible critical (required)

Check for emissions, vehicle compatibility, and installation cautions where applicable.

Yes No N/A

Packaging is intact and not open, crushed, or leaking

Boxes, blister packs, and sealed components are in saleable condition.

Yes No N/A

Price tags and promotional signage are accurate and current

Displayed pricing matches the point-of-sale or current promotion.

Yes No N/A

Hazardous material or chemical product labeling is present where applicable critical (required)

If the display includes cleaners, adhesives, or aerosols, required hazard labeling is visible.

Yes No N/A

Housekeeping, Accessibility, and Customer Safety

Display area is clean and free of dust, debris, and spills

No visible housekeeping deficiencies that could affect appearance or safety.

Yes No N/A

Trip hazards are absent around the display critical (required)

No loose packaging, cords, pallet wrap, or floor merchandise in customer paths.

Yes No N/A

Customer access does not require unsafe reaching or climbing critical (required)

Products are positioned so customers can view and retrieve items without unsafe stretching or use of unstable objects.

Yes No N/A

Display maintains adequate aisle clearance critical (required)

Measure the clear aisle width at the narrowest point near the display.

Records, Corrective Actions, and Final Verification

Deficiencies documented with location and evidence

Record any deficiencies, non-conformances, or critical items observed.

Photo evidence captured for all failed critical items

Attach photos showing the deficiency and surrounding context.

Corrective action owner and due date assigned

Identify who is responsible for remediation and when it must be completed.

Inspector signature completed critical (required)

Final sign-off confirming the audit was completed.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Performance Parts Display Compliance Audit

Inspection Scope and Area Identification

Display Structure and Fixture Integrity

Fire Safety, Heat Sources, and Egress

Product Labeling, Packaging, and Consumer Information

Housekeeping, Accessibility, and Customer Safety

Records, Corrective Actions, and Final Verification

Get your results