Run Masonry / Concrete Trade Daily — Free

Jobsite Setup & Pre-Task Controls

Work area is accessible only to authorized crew and protected from unauthorized entry critical (required)

Verify the active masonry/concrete work zone is controlled before work begins.

Yes No N/A

Pre-task hazard briefing completed for silica, formwork, rebar, and wall placement hazards

Confirm crew received a daily briefing covering the main job-specific hazards.

Yes No N/A

Housekeeping adequate: debris, slurry, cords, and trip hazards removed from travel paths

Walk the work area and access routes for slip, trip, and fall hazards.

Yes No N/A

Required PPE is in use and appropriate for the task critical (required)

Verify hard hats, eye protection, gloves, high-visibility apparel, and task-specific PPE are being worn as required.

Yes No N/A

Silica Dust Controls

Wet methods or equivalent dust suppression in use for cutting, grinding, or mixing operations critical (required)

Observe active dust-generating tasks for visible control measures.

Yes No N/A

Dust collection or vacuum system operating and connected where required

Check that tools requiring local exhaust or collection are properly set up and functioning.

Yes No N/A

Visible airborne dust is controlled and not migrating beyond the work area critical (required)

Confirm dust is not creating an exposure hazard to nearby workers or adjacent trades.

Yes No N/A

Respiratory protection available and used when required by the exposure task

Verify respirators are available, worn correctly, and consistent with the task and site program.

Yes No N/A

Formwork, Shoring & Placement Stability

Formwork, shoring, and bracing are plumb, secure, and free of visible movement critical (required)

Inspect forms and supports before and during placement for signs of instability, shifting, or overload.

Yes No N/A

Formwork components are free of obvious damage, missing hardware, or loose connections

Check ties, pins, clamps, wedges, and fasteners for secure installation.

Yes No N/A

Concrete placement rate is controlled to avoid overloading forms or supports critical (required)

Verify placement methods are consistent with the capacity of the formwork system.

Yes No N/A

Competent person has inspected formwork and support conditions before use

Confirm required inspection has occurred and deficiencies have been corrected or the area has been removed from service.

Yes No N/A

Rebar, Wall Placement & Limited Access Zones

Exposed rebar ends are capped or otherwise protected from impalement critical (required)

Check all protruding reinforcing steel in the work area and adjacent access routes.

Yes No N/A

Limited access zone established during masonry wall construction where required critical (required)

Verify the restricted area is in place to protect workers from wall collapse or falling materials.

Yes No N/A

Limited access zone is clearly marked and kept free of nonessential personnel

Confirm barricades, tape, signage, or other controls are visible and effective.

Yes No N/A

Wall placement activities are being monitored for stability and falling-object hazards

Observe the placement area for safe sequencing, exclusion of personnel, and controlled movement of materials.

Yes No N/A

Tools, Equipment & Documentation

Mixers, saws, pumps, and hand tools are in safe operating condition

Check for damaged guards, frayed cords, leaks, or other visible defects before use.

Yes No N/A

Extension cords, hoses, and power leads are routed to prevent damage and trip hazards

Verify lines are protected from traffic, sharp edges, and pinch points.

Yes No N/A

Deficiencies were documented and assigned for corrective action critical (required)

Record any non-conformance, responsible party, and target completion date.

Yes No N/A

Inspector signature completed

Daily walk must be signed by the inspector or competent person.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Masonry / Concrete Trade Daily

Jobsite Setup & Pre-Task Controls

Silica Dust Controls

Formwork, Shoring & Placement Stability

Rebar, Wall Placement & Limited Access Zones

Tools, Equipment & Documentation

Get your results