Run Manufacturing First-Article Quality Inspection — Free

Inspection Setup and Traceability

Part number matches traveler, drawing, and work order critical (required)

Yes No N/A

Revision level matches the released drawing or specification critical (required)

Yes No N/A

Material lot, heat, or batch traceability recorded critical (required)

Tooling, fixture, mold, or program identifier recorded critical (required)

Inspection equipment calibration status verified critical (required)

Yes No N/A

Dimensional Verification

Critical dimensions measured and recorded critical (required)

Note (optional)

Dimensional characteristics within tolerance critical (required)

Yes No N/A

Geometric tolerances verified critical (required)

Yes No N/A

Hole size, location, and pattern verified where applicable

Yes No N/A

Surface finish or roughness meets specification

Yes No N/A

Visual and Cosmetic Standards

Part is free of burrs, sharp edges, and loose material critical (required)

Yes No N/A

Photo evidence (optional)

No cracks, dents, scratches, contamination, or other visible defects critical (required)

Yes No N/A

Photo evidence (optional)

Markings, labels, and part identification are legible and correct critical (required)

Yes No N/A

Packaging or handling protection prevents damage to the first article

Yes No N/A

Functional and Fit Verification

Functional test passed against acceptance criteria critical (required)

Yes No N/A

Fit-up with mating component or gauge verified critical (required)

Yes No N/A

Assembly or installation clearances are acceptable

Yes No N/A

Any special process outputs verified where applicable

Yes No N/A

Disposition and Release

All non-conformances documented with corrective action reference critical (required)

Yes No N/A

Inspector approval signature captured critical (required)

Production release authorized after first-article acceptance critical (required)

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Manufacturing First-Article Quality Inspection

Inspection Setup and Traceability

Dimensional Verification

Visual and Cosmetic Standards

Functional and Fit Verification

Disposition and Release

Get your results