Run Heat Sealer and Bag Closure Verification - Textile Packaging — Free

Inspection Identification

Inspection type selected

Note (optional)

Line, machine, or sealer ID recorded

Product or style code recorded

Lot, batch, or work order number recorded

Inspection date and time recorded

Inspector name recorded

Reference SOP or validated seal specification available

Sealer Setup and Operating Window

Seal bar temperature within validated operating window critical (required)

Dwell time within validated operating window critical (required)

Sealing pressure within validated operating window critical (required)

Temperature, dwell, and pressure controls are set and locked per SOP critical (required)

Yes No N/A

Sealer warm-up complete and ready for production use critical (required)

Yes No N/A

Bag Closure and Seal Integrity

Seal line is continuous across the full closure width critical (required)

Yes No N/A

Photo evidence (optional)

Seal is free from wrinkles, channels, burn-through, or incomplete fusion critical (required)

Yes No N/A

Photo evidence (optional)

Bag closure is aligned and square with no visible skew or edge contamination

Yes No N/A

Photo evidence (optional)

Seal area is clean, dry, and free of product, lint, or foreign material critical (required)

Yes No N/A

Photo evidence (optional)

Bag closure strength meets sample pull requirement critical (required)

Photo evidence (optional)

Sample Pull Test Results

Sample size tested critical (required)

Average pull force recorded

Note (optional)

Minimum pull force recorded

Note (optional)

Pull test method followed per SOP critical (required)

Yes No N/A

Equipment Condition and Corrective Action

Sealing jaws, pads, and Teflon surfaces are clean and undamaged critical (required)

Yes No N/A

Photo evidence (optional)

Air supply, pneumatic components, and guards are in normal operating condition critical (required)

Yes No N/A

Any seal defect or pull-test failure documented

Yes No N/A

Corrective action taken or escalation completed

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Heat Sealer and Bag Closure Verification - Textile Packaging

Inspection Identification

Sealer Setup and Operating Window

Bag Closure and Seal Integrity

Sample Pull Test Results

Equipment Condition and Corrective Action

Get your results