Run Green Brick Handling and Setting Inspection — Free

Inspection Details

Inspection date and time recorded

Kiln car, line, and product lot identified

Inspector and operator identified

Production run status confirmed before loading critical (required)

Confirm the line is authorized to start and the load is cleared for setting.

Yes No N/A

Green Brick Condition and Handling

Green bricks free of visible cracks, chips, and excessive edge damage critical (required)

Yes No N/A

Photo evidence (optional)

Moisture level appears consistent for handling and setting

Note (optional)

Transfer method minimizes drop height, impact, and rubbing critical (required)

Yes No N/A

Bricks are handled without visible deformation during transfer critical (required)

Yes No N/A

Photo evidence (optional)

Conveyor, transfer table, or feed path is clean and free of debris

Yes No N/A

Setter, Gripper, and Equipment Operation

Gripper jaws, setter heads, or end effectors are aligned and secure critical (required)

Yes No N/A

Equipment cycles smoothly without sticking, mispick, or sudden release critical (required)

Yes No N/A

Setter pressure, vacuum, or gripping force is within operating range critical (required)

Enter the measured operating value used by the machine or line standard.

Note (optional)

Guards, interlocks, and emergency stop devices are functional critical (required)

Yes No N/A

Setting Pattern and Kiln Car Load Quality

Setting pattern matches the approved load layout critical (required)

Yes No N/A

Photo evidence (optional)

Brick courses are level, aligned, and evenly spaced critical (required)

Yes No N/A

Photo evidence (optional)

Load shows no visible sagging, leaning, or unstable stacking critical (required)

Yes No N/A

Photo evidence (optional)

Clearances to kiln car edges, posts, and fixtures are maintained

Yes No N/A

No bridging, overhang, or contact points likely to cause deformation during firing critical (required)

Yes No N/A

Work Area Safety and Housekeeping

Walkways and access points are clear of obstructions critical (required)

Yes No N/A

PPE required for the task is worn critical (required)

Housekeeping prevents loose debris from entering the kiln car load

Yes No N/A

Any non-conformance or defect has been documented and escalated critical (required)

Yes No N/A

Deficiencies, Corrective Actions, and Release

Deficiencies recorded

Corrective actions assigned

Load released for firing critical (required)

Yes No N/A

Inspector signature

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Green Brick Handling and Setting Inspection

Inspection Details

Green Brick Condition and Handling

Setter, Gripper, and Equipment Operation

Setting Pattern and Kiln Car Load Quality

Work Area Safety and Housekeeping

Deficiencies, Corrective Actions, and Release

Get your results