Templates › Inspections › SEO page

Run: Fragrance Tester Fill Level and Atomiser Check

Use this fragrance tester fill level and atomiser check to record which testers are usable, which need refilling or replacement, and which displays need imme...

Fill this out, get a PDF emailed to you. No account required. Want to run it with your team and track results? Sign up free →

Inspection Details

Store or location identified critical (required)

Record the store, department, or fixture location being inspected.

Inspection date and time recorded critical (required)

Capture when the tester inspection was completed.

Inspector name or role recorded

Identify the person completing the inspection.

Brand or tester line identified

Record the fragrance brand, line, or tester identifier.

Tester count inspected

Enter the number of tester bottles included in this inspection.

Fill Level and Product Condition

Tester fill level meets minimum acceptable threshold critical (required)

Measure the estimated fill level as a percentage of full bottle capacity. Below the minimum acceptable threshold is a deficiency and requires replacement request.

No visible leakage on bottle, cap, or display surface critical (required)

Inspect the bottle, neck, cap, and surrounding display area for wetness, residue, or product pooling.

Yes No N/A

Photo evidence (optional)

Bottle is intact and free from cracks or damage critical (required)

Check for cracked glass, broken sprayers, damaged labels, or other physical non-conformances.

Yes No N/A

Photo evidence (optional)

Atomiser Functionality

Atomiser sprays a consistent fine mist critical (required)

Test the sprayer to confirm it dispenses product evenly without sputtering, dribbling, or blockage.

Yes No N/A

Atomiser nozzle is unobstructed and properly seated critical (required)

Verify the nozzle is aligned, secure, and free from residue or clogging.

Yes No N/A

Photo evidence (optional)

Spray output is adequate for customer use

Rate whether the spray performance is suitable for normal tester use.

Display Readiness and Replacement Action

Tester is clean and presentable for customer use

Check that the bottle exterior and display area are free from dust, residue, and sticky buildup.

Yes No N/A

Replacement request needed for brand rep critical (required)

Select the reason a replacement request should be sent to the brand representative.

Note (optional)

Replacement request details documented

Record the action taken, including brand rep contact, request date, and any follow-up needed.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Generated with MangoApps Templates — browse 250+ free