Run Formwork Inspection — Free

Project and Drawing Verification

Project name, location, and pour area match the inspection scope

Latest engineer-approved formwork drawings are available on site critical (required)

Yes No N/A

Formwork layout, member sizes, and support locations match the approved drawings critical (required)

Yes No N/A

Any field changes have documented engineer approval before pour critical (required)

Yes No N/A

Formwork Assembly and Structural Stability

Panels, walers, studs, and joists are properly aligned and securely connected critical (required)

Yes No N/A

Formwork is plumb, level, and within project tolerance

All bearing surfaces are adequate and free from settlement, voids, or unstable ground critical (required)

Yes No N/A

Formwork joints, corners, and closures are tight enough to prevent grout loss

Yes No N/A

Openings, blockouts, and penetrations are securely framed and supported critical (required)

Yes No N/A

Formwork is free from visible damage, excessive deformation, or missing components critical (required)

Yes No N/A

Shoring and Bracing

Shoring members are installed at the locations and spacing shown on the approved drawings critical (required)

Yes No N/A

Shoring is bearing on adequate foundations, sole plates, or mud sills critical (required)

Yes No N/A

Bracing is installed to prevent lateral movement, sway, or overturning critical (required)

Yes No N/A

Shoring and reshores are not overloaded and are arranged per the approved sequence critical (required)

Yes No N/A

Adjustable shores, jacks, and screw supports are locked or secured against movement

Yes No N/A

A competent person has verified the shoring and bracing condition before pour critical (required)

Yes No N/A

Ties, Anchors, and Fasteners

Tie spacing matches the engineer-approved drawings critical (required)

Yes No N/A

Ties, anchors, and connectors are fully engaged and properly tightened critical (required)

Yes No N/A

No missing, bent, cracked, or visibly damaged ties, bolts, or hardware are present critical (required)

Yes No N/A

Tie rods, cones, and washers are installed in the correct orientation and quantity

Yes No N/A

Formwork fasteners and connection hardware are compatible with the system being used

Yes No N/A

Pre-Pour Readiness and Sign-Off

Reinforcement, embeds, sleeves, and blockouts are installed and secured per the approved drawings

Yes No N/A

Debris, standing water, ice, and loose materials have been removed from the formwork area

Yes No N/A

Access, working platforms, and fall protection are in place where required critical (required)

Yes No N/A

No unsafe conditions, active deficiencies, or unresolved non-conformances remain critical (required)

Yes No N/A

Inspection approved for concrete placement critical (required)

Yes No N/A

Get your results

Enter your email — we'll send you a PDF of your filled-out template. We won't sign you up to anything; you can opt in to the trial from the email if you want.

Email (required)

Your name (optional)

Run: Formwork Inspection

Project and Drawing Verification

Formwork Assembly and Structural Stability

Shoring and Bracing

Ties, Anchors, and Fasteners

Pre-Pour Readiness and Sign-Off

Get your results