Run Fall Protection Equipment Pre-Use Inspection — Free

Inspection Details

Inspector name

Inspection date and time

Equipment type inspected

Equipment identification or asset tag

Harness Condition

Webbing is free of cuts, frays, burns, chemical damage, glazing, or abrasion critical (required)

Yes No N/A

Stitching is intact with no broken, pulled, or loose threads critical (required)

Yes No N/A

D-rings, buckles, grommets, and adjusters are not cracked, bent, corroded, or deformed critical (required)

Yes No N/A

Labels and serial information are present and legible critical (required)

Yes No N/A

Harness shows no evidence of contamination that could affect performance

Check for oil, grease, paint, concrete, solvents, or other contamination on webbing or hardware.

Yes No N/A

Lanyard and SRL Function

Lanyard webbing or rope is free of cuts, frays, burns, knots, or chemical damage critical (required)

Yes No N/A

Energy absorber is intact and not deployed critical (required)

Yes No N/A

SRL housing is free of cracks, dents, corrosion, or missing fasteners critical (required)

Yes No N/A

SRL lifeline extends and retracts smoothly without hesitation, binding, or abnormal noise critical (required)

Yes No N/A

SRL self-locking action engages when a sharp pull is applied critical (required)

Yes No N/A

Connectors, Compatibility, and Fit

Hooks, carabiners, and snap hooks close and lock properly critical (required)

Yes No N/A

Connectors are free of distortion, corrosion, cracks, or gate damage critical (required)

Yes No N/A

Equipment is compatible with the intended anchor and fall protection system critical (required)

Verify connector size, gate action, and attachment method are appropriate for the anchor point and do not create roll-out or side-loading risk.

Yes No N/A

Harness is properly sized and adjusted for the user critical (required)

Confirm leg straps, chest strap, and shoulder straps are adjusted for secure fit and freedom of movement without excessive slack.

Yes No N/A

Removal from Service and Closeout

Any critical deficiency found resulted in immediate removal from service critical (required)

Yes No N/A

Defective equipment tagged and isolated from use critical (required)

Yes No N/A

Inspector signature

Get your results

Enter your email — we'll send you a PDF of your filled-out template. We won't sign you up to anything; you can opt in to the trial from the email if you want.

Email (required)

Your name (optional)

Run: Fall Protection Equipment Pre-Use Inspection

Inspection Details

Harness Condition

Lanyard and SRL Function

Connectors, Compatibility, and Fit

Removal from Service and Closeout

Get your results