Run Emergency Lighting Monthly Test Log — Free

Inspection Details

Inspection date and time critical (required)

Inspector name and title critical (required)

Building, area, or floor inspected critical (required)

Inspection type critical (required)

Reference standard or SOP

Record the applicable site procedure or standard used for the inspection, such as OSHA 29 CFR 1910.37 and NFPA 101 emergency lighting requirements.

Emergency Lighting Inventory

Unit identifier or location critical (required)

Record the specific emergency light, exit sign/light combo, or zone being tested.

Unit type critical (required)

Normal power source identified critical (required)

Confirm the unit is connected to the intended branch circuit or normal power source.

Yes No N/A

Physical condition of unit

Assess housing, lens, signage, mounting, and visible damage.

Photo of unit identification plate or location

Capture evidence of the unit or its location if required by site procedure.

Monthly Functional Test

Simulated loss of normal power performed critical (required)

Verify the unit was tested by interrupting normal power or using the approved test method.

Yes No N/A

Emergency illumination activated within required time critical (required)

Confirm the unit illuminated when normal power was removed.

Yes No N/A

Test duration critical (required)

Monthly functional tests should be documented for at least 30 seconds.

Light output adequate for egress path critical (required)

Verify the emergency light provided visible illumination for the intended egress route or area.

Yes No N/A

Any flicker, dimming, or intermittent operation observed critical (required)

Record any unstable operation during the test.

Yes No N/A

Battery and Power Readiness

Battery indicator or charger status normal critical (required)

Confirm the unit indicates normal charging or ready status before and after the test.

Yes No N/A

Battery pack condition critical (required)

Document visible battery condition or any signs of failure.

Wiring, connectors, and plug-in power supply secure critical (required)

Check for loose connections, damaged cords, or exposed conductors.

Yes No N/A

Deficiencies and Corrective Actions

Deficiencies identified

Corrective action required critical (required)

Document whether repair, replacement, or escalation is required for any deficiency.

Yes No N/A

Corrective action details

Describe the repair, replacement, retest, or work order reference.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Emergency Lighting Monthly Test Log

Inspection Details

Emergency Lighting Inventory

Monthly Functional Test

Battery and Power Readiness

Deficiencies and Corrective Actions

Get your results