Run Die and Tooling Changeover Verification (Extrusion) — Free

Inspection Details and Authorization

Changeover identification matches the active job, die, and tooling set

Record the product code, die number, tooling set, and line number being verified.

Inspection performed by authorized setup or quality personnel critical (required)

Yes No N/A

Lockout-tagout applied and verified before die or tooling adjustments critical (required)

Yes No N/A

Area cleared for changeover verification and nonessential personnel excluded critical (required)

Yes No N/A

Die Mounting and Mechanical Alignment

Die is fully seated, secured, and fasteners are torqued to specification critical (required)

Yes No N/A

Photo evidence (optional)

Die face, adapter, and tooling show no visible damage, galling, or contamination

Yes No N/A

Photo evidence (optional)

Die centerline is aligned to the line centerline within tolerance critical (required)

Bolts, clamps, and support hardware are present and properly installed

Yes No N/A

Heaters, thermocouples, and temperature controls are connected and functioning critical (required)

Yes No N/A

Purge, Cleanout, and Material Transition

Previous polymer or alloy material has been fully purged from the die and barrel transition zone critical (required)

Yes No N/A

No visible buildup, carbonization, or degraded material remains at the die exit

Yes No N/A

Photo evidence (optional)

Purge material collected and disposed of according to site waste procedure

Yes No N/A

Material transition completed without contamination, streaking, or color carryover critical (required)

Yes No N/A

Startup Conditions and Safety Controls

Machine guards, barriers, and access covers are installed before startup critical (required)

Yes No N/A

Emergency stop devices are accessible and functional critical (required)

Yes No N/A

Ventilation, fume extraction, or dust collection is operating as required for the material in use

Yes No N/A

PPE required for startup verification is worn

First-Piece Quality Verification

First-piece profile dimensions are within specification critical (required)

Enter the measured deviation from specification for the critical profile dimension, or use the site-defined measurement method.

Photo evidence (optional)

First-piece surface quality is acceptable with no burn marks, voids, tears, or die lines beyond limit critical (required)

Yes No N/A

Photo evidence (optional)

Color, gloss, and appearance match the approved standard sample

Yes No N/A

First-piece sample approved by quality or authorized release personnel critical (required)

Yes No N/A

Release to Production

Any deficiencies or non-conformances documented with corrective actions assigned

Yes No N/A

Line released for production run critical (required)

Yes No N/A

Inspector signature critical (required)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Die and Tooling Changeover Verification (Extrusion)

Inspection Details and Authorization

Die Mounting and Mechanical Alignment

Purge, Cleanout, and Material Transition

Startup Conditions and Safety Controls

First-Piece Quality Verification

Release to Production

Get your results