Run Cargo Tank Closed Gauging Verification — Free

Inspection Scope and Vessel Identification

Cargo tank identification recorded

Record the tank number, cargo system identifier, and inspection location.

Cargo product verified as LPG or other liquefied gas requiring closed gauging critical (required)

Confirm the cargo being inspected requires closed gauging controls under the applicable cargo system rules.

Yes No N/A

Inspection reference documents available

Verify the applicable cargo system procedure, IGC Code reference, and shipboard operating instructions are available to the inspector.

Yes No N/A

Inspector notes on operating condition

Document whether the tank is in service, idle, inerted, or under maintenance at the time of inspection.

Closed Gauging Arrangement

Closed gauging device installed and in use critical (required)

Confirm the tank is equipped with and using a closed gauging arrangement for level measurement.

Yes No N/A

No slip-tube gauging arrangement observed critical (required)

Verify no slip-tube arrangement is being used in a manner that would release LPG to atmosphere.

Yes No N/A

No restricted gauging arrangement releasing vapor to atmosphere critical (required)

Confirm restricted gauging, if present, does not create an open release path to atmosphere during measurement.

Yes No N/A

Gauging interface appears sealed and intact critical (required)

Inspect the gauging point, seals, fittings, and covers for visible damage, leakage, or missing components.

Yes No N/A

Photo evidence (optional)

Evidence of vapor release during gauging critical (required)

Check for visible vapor release, odor, frosting, or other signs of product escaping during measurement.

Yes No N/A

Photo evidence (optional)

Operational Controls and Safety Practices

Procedure requires closed gauging only critical (required)

Confirm the operating procedure prohibits open gauging or any method that vents LPG to atmosphere.

Yes No N/A

PPE appropriate for LPG gauging task available and used

Verify required PPE is available and in use for the task, including eye and face protection as applicable to the site procedure.

Yes No N/A

Area around gauging point controlled during measurement critical (required)

Confirm the area is controlled to prevent ignition sources, unnecessary exposure, or unauthorized access during gauging.

Yes No N/A

Any abnormal condition documented

Record leaks, damaged fittings, procedural deviations, or other non-conformances observed during the inspection.

Compliance Evidence and Corrective Action

Photo evidence captured for non-conformance or deficiency

Attach photos when a deficiency, leak, damaged seal, or prohibited gauging arrangement is observed.

Reference to applicable standard or procedure

Record the applicable IGC Code reference, company procedure, or terminal/vessel instruction used for the inspection.

Corrective action required for any failed critical item critical (required)

Confirm corrective action has been initiated for any failed critical item, including isolation, repair, or operational توقف as required by procedure.

Yes No N/A

Inspector signature critical (required)

Inspector attestation that the closed gauging verification was completed accurately.

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Cargo Tank Closed Gauging Verification

Inspection Scope and Vessel Identification

Closed Gauging Arrangement

Operational Controls and Safety Practices

Compliance Evidence and Corrective Action

Get your results