Run Brick Setting Machine Pre-Operation Inspection — Free

Inspection Setup and Authorization

Machine identification and inspection date recorded

Pre-operation inspection performed by authorized operator or competent person critical (required)

Yes No N/A

Area is clear of unauthorized personnel before startup critical (required)

Yes No N/A

Safety Devices and Guarding

Emergency stop buttons are present, accessible, and functional critical (required)

Yes No N/A

All required guards, interlocks, and light curtains are in place and not bypassed critical (required)

Yes No N/A

Lockout-tagout devices have been removed only after verification and authorization critical (required)

Yes No N/A

Safety labels, warning signs, and beacon/alarm indicators are visible and operational

Yes No N/A

Mechanical Condition

Grippers are secure, undamaged, and free of excessive wear critical (required)

Yes No N/A

Vacuum cups, hoses, and seals are intact with no visible leaks or damage critical (required)

Yes No N/A

Mechanical joints, fasteners, and end effector mounting points are secure

Yes No N/A

No abnormal wear, loose parts, or obstructions are present in the travel path

Yes No N/A

Electrical, Pneumatic, and Vacuum Systems

Electrical cords, connectors, and control cabinet are intact with no exposed conductors critical (required)

Yes No N/A

Air supply pressure is within the manufacturer’s acceptable operating range critical (required)

Vacuum level is within the manufacturer’s acceptable operating range critical (required)

Pneumatic lines, fittings, and regulators show no leaks, kinks, or damage

Yes No N/A

Controls, Program, and Test Run

Correct production program or recipe is selected for the current brick size and pattern critical (required)

Yes No N/A

Teach pendant, HMI, and control buttons respond normally

Yes No N/A

Dry cycle or first-piece test run completed without alarm, fault, or mispick critical (required)

Yes No N/A

Work Area and Release

Floor, access path, and kiln car loading area are free of debris, slip hazards, and obstructions

Yes No N/A

PPE required for startup and operation is available and worn

Machine is released for operation critical (required)

Note (optional)

Get your results

Enter your email — we'll send you a PDF of your filled-out template, plus the occasional MangoScoop newsletter (templates, workflow tips, product updates). Unsubscribe anytime — link is in every email.

Email (required)

Your name (optional)

Run: Brick Setting Machine Pre-Operation Inspection

Inspection Setup and Authorization

Safety Devices and Guarding

Mechanical Condition

Electrical, Pneumatic, and Vacuum Systems

Controls, Program, and Test Run

Work Area and Release

Get your results