Site Erosion Control Inspection

Inspection template for evaluating erosion and sediment control measures on active sites, including silt fence, wattles, inlet protection, stabilization, and discharge points.

Inspection Details

• Inspection date and time recorded
• Inspection triggered by scheduled weekly check or post-rain event
• Inspector name and company
• Site area or phase inspected
• Weather conditions at time of inspection

Perimeter and Downslope Controls

• Silt fence is installed along required perimeter locations
• Silt fence is upright, anchored, and free of undercutting or bypass flow
• Silt fence is free of tears, collapsed sections, or overtopping sediment buildup
• Wattles or fiber rolls are installed at required contour or slope locations
• Wattles are intact, properly staked, and not displaced by runoff

Inlet and Drainage Protection

• Storm drain inlet protection is installed at required inlets
• Inlet protection is secure, functional, and not causing ponding or bypass
• Sediment accumulation at inlet protection is within acceptable limits
• Discharge points show no visible sediment-laden runoff leaving the site

Stabilization and Bare Soil Areas

• Disturbed soil areas are stabilized with seed, mulch, matting, or other approved cover
• Temporary or permanent stabilization is adequate for exposed slopes and stockpiles
• Bare soil areas show no active rilling, gullying, or slope failure
• Stockpiles are protected and stabilized to prevent sediment transport

Housekeeping, Maintenance, and Documentation

• Accumulated sediment has been removed from controls before reaching failure level
• Damaged or displaced erosion controls have been repaired or replaced
• Construction entrances, haul routes, and adjacent pavement are free of tracked sediment
• Corrective actions assigned with responsible party and due date
• Inspector signature completed