Sanitizer Bucket Concentration Check

Per-shift sanitizer concentration verification using test strips. Standard concentrations: 200-400 ppm chlorine, 150-400 ppm QAC, 12.5-25 ppm iodine.

Inspection Details

• Sanitizer type selected
  Select the sanitizer in the bucket being tested.
• Verification time
  Record the date and time the concentration was checked.
• Bucket location or station
  Identify the station, prep area, or sink where the sanitizer bucket is located.
• Test strip lot or brand
  Optional traceability field for the test strips used.

Concentration Verification

• Measured sanitizer concentration
  Enter the measured ppm reading from the test strip.
• Concentration within acceptable range
  Confirm the reading is within the acceptable range for the sanitizer type selected.
• Test strip color matched correctly
  Verify the strip was read using the manufacturer’s color chart at the correct reaction time.
• Sanitizer concentration standard
  Acceptable ranges: chlorine 200-400 ppm; QAC 150-400 ppm; iodine 12.5-25 ppm.

Corrective Action and Release

• Corrective action required if out of range
  Select all corrective actions completed when the concentration was not within range.
• Bucket released for use
  Confirm the bucket is within range and approved for use.
• Inspector comment
  Record any notes, including unusual readings, remake details, or follow-up actions.