Recloser and Sectionalizer Field Inspection Checklist

Field inspection template for pole-mounted reclosers and sectionalizers covering operation counters, controls, oil or vacuum condition, communication status, and visible safety/non-conformance findings.

Inspection Details

• Asset ID / device number recorded
• Pole location and feeder identified
• Inspection date and time recorded
• Inspection type selected
• Work authorization and switching clearance verified
  Confirm the crew has the required authorization, access control, and switching clearance before inspection activities begin.

Pole, Mounting, and Visible Physical Condition

• Pole, crossarm, and mounting hardware secure
  Check for loose bolts, cracked brackets, damaged insulators, or any visible instability of the mounted equipment.
• Enclosure, tank, and external surfaces free of cracks, dents, or impact damage
• Corrosion, rust, or paint failure observed
• Oil leakage, staining, or evidence of dielectric fluid loss
• Clearances, access, and surrounding vegetation acceptable
  Verify the device is not obstructed by vegetation, structures, or debris and that safe access is maintained for operation and maintenance.

Controls, Indicators, and Operation Counters

• Control cabinet door, latch, and seals intact
• Control power / battery status normal
• Operation counter reading recorded
• Target indicators, flags, or trip/reclose status normal
• Control settings label or configuration matches expected record

Interrupter and Mechanism Condition

• Interrupter type identified
• Oil level / sight glass within acceptable range
• Vacuum interrupter condition indicators normal
  For vacuum devices, verify visible condition indicators, seals, and any manufacturer-specific status marks are normal.
• Operating mechanism shows no abnormal noise, binding, or delayed motion
• Manual operating handle, trip lever, or external reset device intact

Communication, Protection, and Safety Status

• Communication status normal
• Alarm, fault, or event indication reviewed
• Grounding and bonding visibly intact
• Approach area safe and PPE used per job hazard assessment
• Any immediate hazard requiring de-energization or escalation

Deficiencies, Corrective Actions, and Sign-Off

• Deficiencies documented
• Corrective action / work order number
• Inspector signature