Pressure Vessel Installation Inspection

Inspection template for verifying pressure vessel setting, orientation, nozzle positions, supports, anchor bolts, and installation readiness before startup.

Inspection Details

• Vessel tag number recorded
• Installation location recorded
• Inspection date and time recorded
• Inspector name and company recorded
• Reference drawing, datasheet, or SOP available on site

Vessel Setting and Orientation

• Vessel installed in correct horizontal or vertical orientation
• Vessel level, plumb, and aligned within project tolerance
• Elevation and foundation match approved installation drawings
• Required clearances maintained for access, maintenance, and code compliance
• Nameplate visible and legible after installation

Nozzles, Connections, and Appurtenances

• All nozzles oriented per approved drawing
• Nozzle positions and elevations match installation plan
• Flanged, threaded, or welded connections show no visible damage or misalignment
• Pressure relief device, instruments, and vents installed in correct locations
• Connections are accessible for inspection, operation, and maintenance

Supports, Anchors, and Foundation

• Supports, saddles, or skirt are installed per design
• Anchor bolts installed, tightened, and secured
• Anchor bolt condition shows no visible damage, missing hardware, or improper engagement
• Grout, baseplate, and foundation are intact with no visible cracking or voids
• Thermal expansion or movement allowances provided where required by design

Safety, Compliance, and Closeout

• Temporary shipping restraints removed or accounted for per procedure
• Lockout-tagout applied where required during inspection activities
• Inspection deficiencies documented with location and corrective action
• Photos captured for all failed critical items
• Inspector signature completed