Pool Mechanical Room Inspection Log

Inspection log for the pool mechanical room covering pumps, filters, chemical feeders, leaks, and related safety conditions.

Inspection Details

• Inspection date and time recorded
• Inspector name or ID recorded
• Pool area or mechanical room identified
• Inspection type selected

Pump and Circulation Equipment

• Primary circulation pump running normally with no unusual noise or vibration
• Pump housing, seals, and unions show no visible leaks
• Pump motor and electrical connections show no signs of overheating, damage, or exposed conductors
• Pump strainer basket or pre-filter is clean and properly seated
• Operating pressure or flow reading is within normal operating range

Filters and Filtration System

• Filter pressure is within the normal operating range for the system
• Filter vessel, lid, clamps, and gaskets are intact with no visible leaks
• Filter media or cartridges are clean or within service interval
• Backwash, rinse, or cleaning cycle components are functioning and unobstructed

Chemical Feeders and Chemical Handling

• Chemical feeder pumps are operating and delivering at the expected setpoint
• Chemical feed lines, tubing, and injection points show no leaks, crystallization, or blockage
• Chemical containers are labeled, secured, and stored according to site procedure
• Required PPE is available and appropriate for chemical handling in the room

Leaks, Housekeeping, and Room Conditions

• No active water leaks, standing water, or wet floors present
• Floor drains are clear and unobstructed
• Walkways, access panels, and equipment clearances are unobstructed
• Room is free of excessive corrosion, debris, or chemical residue