Metal Detector CCP Verification Log

Inspection log for verifying metal detector critical control point performance using ferrous, non-ferrous, and stainless steel test pieces at startup and defined intervals for HACCP compliance.

Inspection Details

• Inspection date and time
• Line, area, or equipment ID
• Inspector name
• Verification type

Metal Detector Setup and Status

• Metal detector powered on and in normal operating mode
• Reject device armed and operational
• Conveyor or product flow clear for test
• Detector sensitivity setting matches approved SOP

Test Piece Verification

• Ferrous test piece detected and rejected
• Ferrous test piece size
• Non-ferrous test piece detected and rejected
• Non-ferrous test piece size
• Stainless steel test piece detected and rejected
• Stainless steel test piece size

Interval and Frequency Control

• Verification performed at the required startup check
• Verification performed at the required scheduled interval
• Interval length per SOP
• Last successful verification time

Corrective Action and Release

• Any failed test was isolated and product since last good check was placed on hold
• Corrective action documented for any failure
• Supervisor or QA review completed