Mast Climber Daily Inspection

Daily inspection template for mast climber work platforms covering structural condition, ties, mast straightness, limit switches, emergency descent, and essential safety controls.

Inspection Details

• Inspection date and time recorded
• Inspector identified as competent person
  Enter the name and role of the person performing the inspection.
• Mast climber identification recorded
  Record equipment ID, make/model, and location of the unit inspected.
• Equipment removed from service if any critical defect found
  Confirm the unit is tagged out and not used until defects are corrected.

Structural Condition

• Platform frame, deck, and guardrail structure free of cracks, deformation, or missing components
• Fasteners, pins, locks, and retaining devices present and secure
• Deck surface clean, intact, and free of excessive slip or trip hazards
• Access gates or entry points close and latch properly
• No visible damage to electrical cables, control pendants, or exposed wiring
• Load rating and warning labels legible and in place

Mast, Ties, and Anchoring

• Mast sections are straight, aligned, and free from visible distortion
• Mast connections, couplers, and joints are secure
• Ties, braces, and anchors are installed per manufacturer requirements
• Tie points and anchor hardware show no looseness, damage, or missing parts
• Base supports, outriggers, and leveling components are stable and properly set
• No evidence of settlement, movement, or foundation instability

Functional Safety Controls

• Upper and lower limit switches function correctly during test
• Emergency stop control functions correctly and is clearly marked
• Emergency descent system operates as intended
• All operating controls return to neutral and respond properly
• Interlocks, overload protection, and safety devices are functional
• Audible and visual alarms operate correctly where equipped

Work Area and Operational Readiness

• Work area beneath and around the mast climber is clear of obstructions and unauthorized personnel
• Weather and site conditions are suitable for safe operation
• Required PPE is available and being used
• Inspection findings documented and communicated to supervisor
• Corrective actions or deficiencies recorded
  List any deficiencies, non-conformances, or actions taken before the equipment is returned to service.