Masonry Brick Mockup Approval Inspection

Inspection template for approving masonry brick mockups, focusing on bond joints, color consistency, and tie spacing before full installation.

Project Reference and Mockup Setup

• Approved drawings, submittals, and sample references are available on site
• Mockup location and extent match the approved scope
• Materials used in the mockup match approved brick, mortar, and accessories
• Weather and substrate conditions are suitable for evaluation
• Mockup is clean, accessible, and ready for review

Bond Pattern and Layout

• Bond pattern matches the approved design
• Head joints are staggered consistently and maintain proper lap
• Coursing is level and visually consistent across the mockup
• Vertical and horizontal alignment is acceptable with no visible bowing or wandering
• Openings, corners, returns, and terminations are laid out cleanly

Mortar Joints and Finish

• Bed and head joint thickness is consistent with approved tolerances
• Mortar joints are fully filled with no visible voids or gaps
• Joint tooling profile matches the approved finish
• Mortar smears, staining, and excess mortar are minimized
• Joint color and texture are consistent throughout the mockup

Brick Color and Appearance

• Brick color matches the approved sample and project expectations
• Color variation is within acceptable range and visually balanced
• Brick faces are free of chips, cracks, excessive efflorescence, or other defects
• Texture, finish, and sheen are consistent across visible areas
• Mockup provides an acceptable visual representation of the final installation

Tie Spacing and Installation Compliance

• Tie spacing matches approved drawings and project specifications
• Ties are installed at the correct height and embedment location
• Ties are secure, properly aligned, and free of visible damage
• Installation complies with the applicable project quality requirements and manufacturer instructions

Final Approval and Sign-Off

• Mockup approved for full installation
• Deficiencies or non-conformances identified
• Corrective action required before approval
• Inspector signature