Pile Driving Daily Log

Daily field log for recording pile driving progress, blow counts, refusal criteria, hammer performance, and embedment measurements.

Log Details

• Log Date
  Select the date the pile driving work was performed.
• Project Name
  Enter the project or site name.
• Work Location
  Enter the specific area, structure, or station where pile driving occurred.
• Shift

Pile and Driving Setup

• Pile ID
  Enter the pile identifier or mark number.
• Pile Type
• Hammer Type
• Lead and alignment verified?
  Confirm the leads, alignment, and positioning were checked before driving.

Driving Progress

• Driving Start Time
  Record when driving began for this pile.
• Driving End Time
  Record when driving stopped for this pile.
• Embedment Depth Achieved
  Enter the total embedment achieved during this log period.
• Embedment Unit

Blow Counts and Refusal Criteria

• Blow Count for Last 10 Inches/25 cm
  Enter the number of blows required for the last 10 inches or 25 cm of penetration.
• Refusal Criteria Reference
  Enter the project specification or acceptance criterion used for refusal.
• Refusal reached?
• Acceptance criteria met?
  Indicate whether the pile met the specified driving criteria.

Hammer Performance

• Rated Hammer Energy
  Enter the rated energy used for the hammer during this operation.
• Energy Unit
• Hammer Performance
  Rate hammer performance during the shift.
• Hammer Issues or Downtime
  Describe any malfunctions, delays, or maintenance issues affecting driving.

Exceptions and Sign-Off

• Exceptions or Unusual Conditions
  Document weather, obstructions, refusal anomalies, or other unusual conditions.
• Corrective Actions Taken
  Describe any corrective actions taken in response to exceptions or equipment issues.
• Submitted By
  Enter the name or role of the person completing this log.
• Field Sign-Off
  Optional signature for field verification and audit trail.