Boiler Daily Operating Log

Daily operational log for recording boiler readings, water treatment checks, blowdown activity, and safety device tests.

Log Details

• Log Date
  Select the date the boiler readings were taken.
• Shift
  Choose the shift during which the log was completed.
• Boiler ID
  Enter the boiler or unit identifier.
• Operator Name
  Enter the name of the operator completing the log.

Boiler Operating Conditions

• Steam Pressure (psi)
  Record the current steam pressure in pounds per square inch.
• Water Level
  Select the observed boiler water level.
• Feedwater Temperature (°F)
  Record the feedwater temperature if monitored during the shift.
• Stack Temperature (°F)
  Record the stack or flue gas temperature if available.
• Operating Notes
  Add any notable operating conditions, alarms, or unusual observations.

Water Treatment Checks

• pH Level
  Record the measured pH level if tested.
• Conductivity (µS/cm)
  Record conductivity if monitored.
• Chemical Treatment Added?
  Indicate whether any water treatment chemicals were added.
• Chemicals Used
  Select all chemicals added during the shift.
• Water Treatment Notes
  Document test results, dosage details, or follow-up actions.

Blowdown Activity

• Blowdown Performed?
  Indicate whether a blowdown was performed during the shift.
• Blowdown Type
  Select the type of blowdown performed.
• Blowdown Duration (minutes)
  Enter the total blowdown duration in minutes.
• Blowdown Notes
  Add any observations, issues, or corrective actions related to blowdown activity.

Safety Device Tests

• Low Water Cutoff Tested?
  Indicate whether the low water cutoff was tested.
• Pressure Relief Device Tested?
  Indicate whether the pressure relief device was tested.
• Gauge Glass Checked?
  Indicate whether the gauge glass was inspected for visibility and proper operation.
• Safety Device Exceptions or Defects
  Describe any failed tests, defects, or follow-up actions required.

Exceptions and Sign-Off

• Exceptions Observed?
  Indicate whether any exceptions, alarms, or abnormal conditions were observed.
• Exception Details
  Describe the exception and any corrective action taken.
• Operator Signature
  Sign to confirm the accuracy of this daily operating log.